Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - 2.0L T) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the engine room under cover.

    (Refer to "ENGINE ROOM UNDER COVER ")

  3. Disconnect the connector (A), and then remove the ambient temperature sensor (B).
Fig 1: Locating Ambient Temperature Sensor And Connector
G12170395Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals