Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Rio SX >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Curtain Airbag (CAB) Module >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least thirty seconds.
  3. Tighten the curtain airbag mounting bolts.

    Tightening Torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

    CAUTION:
    • NEVER twist the airbag module during installation. If the airbag module is twisted, it may not operate as designed.
  4. Connect the curtain airbag connector.
  5. Install the Roof Trim.

    (Refer to ROOF TRIM ")

  6. Reconnect the battery negative cable.
  7. After installing the curtain airbag (CAB), confirm proper system operation:
    • Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
scientia non olet · About Mike's Workshop Manuals