Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 62 (Smart Key Code Saving Diagnosis (Except HEV)) >> DTC P1676-00: Immobilizer-Smartra Message Error >> Verification of Repair

Verification of Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect KDS/GDS to Data Link Connector (DLC), and monitor "Diagnostic Trouble Codes (DTC)".
  2. Clear all DTCs in the system with KDS/GDS.
  3. Operate system or vehicle within DTC detecting condition in DTC Detecting Condition chart.
  4. Monitor "Diagnostic Trouble Codes (DTC)" with KDS/GDS and verify that any DTC is stored.
  5. Are any DTCs stored in the system?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • Problem is corrected and the system operation performs to specification at this time.
scientia non olet · About Mike's Workshop Manuals