Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Engine Control System - 2.4L (Except HEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to INTAKE AND EXHAUST SYSTEM - 2.4L (EXCEPT HEV) ).
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 1: Disconnecting ETC Module Connector
G12146841Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals