Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Control System - 2.0L (Except HEV)) >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the fuel tank.

    (Refer to Fuel Delivery System - "FUEL TANK ")

  3. Disconnect the fuel tank pressure sensor connector.
  4. Disconnect the fuel tank pressure sensor (A).
    Fig 1: Disconnecting Fuel Tank Pressure Sensor
    G12145758Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals