Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Control System - 2.0L (Except HEV)) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery (-) terminal.
  2. Remove the front bumper cover.

    (Refer to Body - "FRONT BUMPER COVER ")

  3. Disconnect the connector (A) and then remove the ambient temperature sensor (B).
    Fig 1: Removing Ambient Temperature Sensor
    G12145763Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals