Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System (PHEV) >> Cooling Fan (Engine) >> Repair Procedures >> Removal And Installation >> Cooling Fan Control Module

Cooling Fan Control Module

  1. Disconnect the battery negative terminal.
  2. Remove the air duct.

    (Refer to Intake and Exhaust System - "AIR CLEANER ")

  3. Disconnect the cooling fan control module connector (A) and cooling fan motor connector (B).
    G12352695Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the cooling fan control module (A).

    Tightening Torque: 

    4.9 - 8.3 N.m (0.50 - 0.85 kgf.m, 3.6 - 6.1 lb.ft)

    G12352696Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals