Radar Sensor Alignment (SCC/AEB)

- Parking (Stop) mode -

1. Ignition "ON".
2. Perform  "Vehicle S/W Management" → "Radar Sensor Alignment (SCC/AEB)" with KDS/GDS. (Figure below)
3. Select the [C1]. (Figures below)
4. Satisfy the vehicle to the conditions of Parking (Stop) mode. (Figure below)
5. Press [OK] button to carry out the calibration.

- Running (Driving) mode -

1. Ignition "ON".
2. Perform  "Vehicle S/W Management" → "Radar Sensor Alignment (SCC/AEB)" with KDS/GDS. (Figure below)
3. Select the [C2]. (Figures below)
4. Satisfy the vehicle to the conditions of Running (Driving) mode. (Figure below)
5. Once running (driving) mode sensor calibration is started, drive the vehicle until the red warning lamp is turned "OFF". (Figures below)
6. Warning lamp is turned "OFF", when calibration is successfully finished.

   : Parking (Stop) mode

   : Running (Driving) mode