Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Automatic Transaxle Control System - 2.4L (Except HEV)) >> Output Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve body assembly.

    (Refer to Hydraulic System - "VALVE BODY ")

  2. Disconnect the input & output speed sensor connector (A).
  3. Remove the input & output speed sensor (B) after loosening the bolts.

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Fig 1: Disconnecting Input & Output Speed Sensor Connector
G12148186Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals