Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Automatic Transaxle Control System - 2.4L (Except HEV)) >> Output Speed Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" ignition.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G12148184Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (3) and signal terminal (4).

    Specification:  Approx. 0.88 MΩ

Fig 2: Solenoid Valve Connector Terminals
G12148185Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals