Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine Control System - 2.4L (Except HEV)) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the accelerator position sensor (B) after loosening the mounting bolts.

    Accelerator pedal sensor mounting bolt: 

    8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

Fig 1: Removing Accelerator Position Sensor
G12146896Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals