Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System - 1.6L (Except HEV)) >> Boost Pressure Sensor (BPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct (A).
    Fig 1: Locating Air Duct With Bolts
    G12140208Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the boost pressure sensor connector (A).
  4. Remove the sensor (B) by loosening the mounting bolts.
    Fig 2: Locating Boost Pressure Sensor And Connector
    G12140209Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals