Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System - 2.0L (Except HEV)) >> RCV Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the RCV control solenoid valve connector.
  3. Measure resistance between the valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  28.3 - 31.1 Ω [20°C (68°F)]

scientia non olet · About Mike's Workshop Manuals