Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System - 2.0L (Except HEV)) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor from the intake manifold.
    Fig 1: Disconnecting Manifold Absolute Pressure Sensor Connector
    G12145694Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals