Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System - 2.0L (Except HEV)) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery (-) terminal.
  2. Remove the front bumper cover.

    (Refer to Body - "FRONT BUMPER COVER ")

  3. Disconnect the connector (A) and then remove the ambient temperature sensor (B).
    Fig 1: Removing Ambient Temperature Sensor
    G12145763Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals