System Inspection

■ Coolant Level Inspection 

1. Check the cooling system coolant level.
2. Is the coolant in the reservoir at the proper level?

   YES 

   • Go to next procedure.

   NO 

   • Repair as necessary and go to "Verification of Vehicle Repair " procedure.

■ Thermostat Inspection 

1. Check if the thermostat bypass valve is stuck in the open position or if the correct type of thermostat was installed.
2. Check the valve opening temperature of the thermostat

   Specification:  88 ± 1.5°C (Valve opening temperature)/100°C (212°F) (Full opening temperature)

3. Does the Thermostat operate properly?

   YES 

   • Go to "Component Inspection " procedure.

   NO 

   • Repair as necessary and go to "Verification of Vehicle Repair " procedure.