Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte5 LX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 1.6L T) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the PCSV (D) by loosening the mounting bolt (C).
Fig 1: Purge Control Solenoid Valve Connector, Vapor Hose, Purge Control Solenoid Valve And Mounting Bolt
G12161421Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals