Repair Procedures: Inspection
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch OFF.
- Disconnect the CCV connector.
- Measure resistance between the CCV terminal 1 and 2.
- Check that the resistance is within the specification.
Item Specification Coil Resistance (Ω) 19.5 - 22.5 [20°C (68°F)] - Disconnect the vapor hose connected with the canister from the CCV.
- Connect a vacuum pump to the nipple.
- Ground the CCV control line and apply battery voltage to the CCV power supply line.
- Apply vacuum and check the valve operation.
Specification : Vacuum maintained