Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte5 EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Control System - 1.6L T) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> ETC Motor

ETC Motor

WARNING: This page is about a different car, the 2018 Kia Forte5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  0.3 - 100 Ω [20°C (68°F)]

scientia non olet · About Mike's Workshop Manuals