Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte5 EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Control System - 2.0L GDI) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Inspection >> Notes

Repair Procedures: Inspection: Notes

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the HO2S connector.
  3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
  4. Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
  5. Check that the resistance is within the specification.
scientia non olet · About Mike's Workshop Manuals