Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte S >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Automatic Transaxle Control System - 2.0L GDI) >> Oil Temperature Sensor (Main Harness) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" ignition.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the main connector (A).
    Fig 1: Disconnecting Main Connector
    G12163245Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between + terminal (9) and - terminal (13).
Fig 2: Oil Temperature Sensor Connector Terminals
G12163246Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals