Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte LX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Control System - 1.6L T) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Kia Forte5 and 2017 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the PCSV connector.
  3. Measure resistance between the PCSV terminals 1 and 2.
  4. Check that the resistance is within the specification.
    Item Specification
    Coil Resistance (Ω) 22.0 - 26.0 [20°C (68°F)]
scientia non olet · About Mike's Workshop Manuals