Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte LX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Control System - 1.6L T) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> ETC Motor

ETC Motor

WARNING: This page is about a different car, the 2017 Kia Forte5 and 2017 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  0.3 - 100 Ω [20°C (68°F)]

scientia non olet · About Mike's Workshop Manuals