Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Electronic Stability Control (ESC) System) >> Electronic Stability Control (ESC) System >> Troubleshooting >> Problem Symptoms Table >> Check The Power Source For The ABS Warning Lamp

Check The Power Source For The ABS Warning Lamp

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the instrument cluster connector (M08) and turn the ignition switch ON.
  2. Measure the voltage between terminal (M08) 22 of the cluster harness side connector and body ground.

    Specification:  approximately B+

    Fig 1: Measuring Voltage Between Terminal (M08) 22 Of Cluster Harness Side Connector And Body Ground
    G12163880Courtesy of KIA MOTORS AMERICA, INC.

    Is voltage within specification?

    YES 

    • Check the CAN circuit resistance for ABS warning lamp.

    NO 

    • Check for blown fuse.
scientia non olet · About Mike's Workshop Manuals