Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Control System - 1.6L T) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Forte5 and 2017 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the PCSV (D) by loosening the mounting bolt (C).
Fig 1: Purge Control Solenoid Valve Connector, Vapor Hose, Purge Control Solenoid Valve And Mounting Bolt
G12161421Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals