| DTC Strategy |
Case 1 |
- During Engine running check accuracy of time measurement by Engine -off timer micro-com
|
- Poor connection or damaged harness
- Unstable Power
- Faulty ECM/PCM
|
| Case 2 |
- During Engine stop, check Engine -off timer start increment
|
| Enable Condition |
Case 1 |
- Engine speed is faster than 32 rpm
- Time is more than 10 sec after Engine start
- Battery voltage is between 10V and 16V
|
| Case 2 |
- Transition ignition key "ON" to "OFF"
- Battery voltage is between 10V and 16V
|
| Threshold Value |
Case 1 |
- Compare Engine -off timer time ratio deviation measurement with Engine running timer (Main μC)
- Deviation ratio is greater than 10%
- Deviation ratio is between measurement time and internal μC Time
|
| Case 2 |
- Compare Engine -off timer time measurement with timer after ignition key off and Engine stop (Main μC)
- Deviation is greater than 2s
|
| Diagnostic Time |
Case 1 |
|
| Case 2 |
|
| MIL ON Condition |
|