Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electric Stability Program Diagnosis >> DTC C1542-01: Brake Circuit Error >> Wiring Inspection >> Power Circuit Inspection

Power Circuit Inspection

  1. Ignition "OFF"
  2. Refer to applicable service information and disconnect brake lamp switch connector.
  3. Ignition "ON"
  4. Measure the voltage between Pin No. 3 (Power) terminal of brake lamp switch harness connector and chassis ground.

    Specification:  B+

  5. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals