Replacement of Component Parts
When replacing the system component parts, supply the following amount of oil to the component parts to be installed.
| Component Parts To Be Installed | Amount Of Oil |
|---|---|
| Evaporator | 50 cc (1.70 fl.oz) |
| Condenser | 30 cc (1.02 fl.oz) |
| Receiver-drier | 30 cc (1.02 fl.oz) |
| Refrigerant line (One piece) | 10 cc (0.34 fl.oz) |
For compressor replacement, subtract the volume of oil drained from the removed compressor from the specified volume, and drain the calculated volume of oil from the new compressor:
The specified volume - volume of removed compressor = volume to drain from the new compressor.
NOTE:
Even if no oil is drained from the removed compressor, don't drain more than 50cc from the new compressor.