Throttle Position Sensor (TPS)
WARNING: This page is about a different variant/trim than selected.
- Connect the KDS/GDS on the Data Link Connector (DLC).
- Start the engine and measure the output voltage of TPS 1 and 2 at C. T. and W.O. T.
| Throttle Angle |
Output Voltage (V) [Vref = 5V] |
| TPS 1 |
TPS 2 |
| C. T |
0.5 |
4.5 |
| W.O. T |
4.41 |
0.59 |