Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Dual Clutch Transmission Control System - 1.6L T) >> Input Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Forte5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch actuator.

    (Refer to Dual Clutch Transmission Control System - "CLUTCH ACTUATOR ASSEMBLY ")

  2. Remove the input speed sensor (A) by loosening the bolts after disconnecting the connector (B).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    Fig 1: Locating Input Speed Sensor And Connector With Bolts
    G12163551Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals