Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Multi Function Camera Diagnosis) >> DTC C1532-11: LKAS/LDWS Switch Failure >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Switch signal monitoring
  1. Poor connector connection
  2. LDWS/LKAS switch
  3. LDWS/LKAS ECU
Enable Conditions
  • Ignition "ON"
  • Normal battery voltage (9±0.5 - 16±0.5V)
Threshold Value
  • Switch ground circuit is short to ground or battery or open.
  • Switch stuck high
Detecting Time
  • 2s
  • 120s
Recovery Time
  • 0.5s
Recovery Condition
  • Normal switch signal
  • Ignition "Off" & "On"
Warning Lamp
  • LDWS/LKAS Lamp "ON"
Fail-Safe LDW
(Lane Departure Warning)
  • Function inhibited
LKA
(Lane Keeping Assist)
  • Function inhibited
HBA
(High Beam Assist)
  • -
FCW
(Forward Collision Warning)
  • -
Fusion
  • -
SLIF
(Speed Limit Information Function)
  • -
scientia non olet · About Mike's Workshop Manuals