Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P0706-61: Transmission Range Sensor Circuit Range/Performance >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Rationality Monitoring
  1. Faulty N Position Setting
  2. Poor Shift Lever Assembly
  3. Poor Connector Connection
  4. Faulty Inhibitor Circuit
  5. Faulty Inhibitor Switch
  6. Faulty PCM/TCM
Enable Conditions
  • Engine "ON"
  • Ignition "ON"
  • Ignition "ON" voltage is more than 10V
Threshold value
  • Invalid range signal is detected (S1+S2 signal is less then 97% higher than 103%)
Fail safe
  • 5th Gear Hold
Detecting Time
  • 4s
MIL ON Condition
  • 2 Driving Cycles
scientia non olet · About Mike's Workshop Manuals