Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the purge control solenoid valve connector (A).
  4. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  5. Remove the purge control solenoid valve.
Fig 1: Disconnecting Purge Control Solenoid Valve Connector
G12335864Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals