Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition.
  2. Disconnect the PCSV connector.
  3. Measure resistance between the PCSV terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  14.3 - 14.7 Ω [20°C (68°F)]

scientia non olet · About Mike's Workshop Manuals