Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System) >> NVLD (Natural Vacuum Leakage Detection) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the fuel tank.

    (Refer to Fuel Delivery System - "FUEL TANK ")

  3. Disconnect the NVLD connector (A) and ventilation hoses (B).
  4. Remove the NVLD (C) after loosening the mounting screws (D).
Fig 1: Disconnecting NVLD Connector And Ventilation Hoses
G12335856Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals