Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (6 Of 6) >> DTC P2540-00: Low Pressure Fuel System Sensor Circuit Range/Performance >> Wiring Inspection >> FPCM Power Circuit Inspection

FPCM Power Circuit Inspection

  1. Ignition "ON", engine "ON".
  2. Measure voltage between Pin No. 10 (Fuel Pump Relay 'ON' Input) terminal of FPCM connector and chassis ground.

    Specification:  Approx. 13.5V

  3. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals