Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (5 Of 6) >> DTC P2105-00: Limp Home Mode - Force Engine Shutdown >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

  1. Connect KDS/GDS to Data Link Connector (DLC).
  2. Ignition "ON".
  3. Monitor "Diagnostic Trouble Codes (DTC)" with KDS/GDS.
    Fig 1: Scantool Display - Diagnostic Trouble Code
    G12283784Courtesy of KIA MOTORS AMERICA, INC.
  4. Is DTC status displayed as Present?

    YES 

    • Performs the appropriate diagnostic procedure after checking other DTC.
    • If the diagnostics have been performed correctly with no failure found, replace the ECM and then go to "VERIFICATION OF REPAIR " procedure.

    NO 

scientia non olet · About Mike's Workshop Manuals