Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Engine Control System - 2.0L) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the mounting bolt.
    G11955515Courtesy of KIA MOTORS AMERICA, INC.
    G11955516Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals