Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Automatic Transaxle Control System - 2.0L) >> Inhibitor Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Shift the gear to "N".
  2. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER .")

  3. Disconnect the inhibitor switch connector (A) and loosen the shift cable mounting nut (B).
    G11955921Courtesy of
  4. Remove the manual control lever (B) and the washer after removing a nut (A).
    G11955922Courtesy of
  5. Remove the inhibitor switch (A) after loosening the bolts (B).
G11955923Courtesy of