Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C2228: CAN Signal Error TCM For SCC (Check TCM) >> Component Inspection

Component Inspection

  1. Ignition switch "OFF".
  2. Ignition switch "ON".
  3. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  4. Using a GDS and clear the DTC.
  5. Select "Diagnostic Trouble Codes (DTC)" mode again.
  6. Are any DTCs present?

    YES 

    • The main cause of this code is that improper CAN signal from TCM system is detected.
    • Check DTCs in TCM system. If there is a code in TCM system, repair according to DTC diagnositic guide of TCM system.

    NO 

scientia non olet · About Mike's Workshop Manuals