Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C1237: Primary Pressure Sensor-Signal >> Wiring Inspection >> Power Circuit Inspection

Power Circuit Inspection

  1. Ignition "OFF".
  2. Disconnect HECU connector.
  3. Ignition "ON".
  4. Measure voltage between Pin No. 1 (Power) terminal of HECU harness connector and chassis ground.

    Specification:  B+

  5. Is measured value within specification?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals