DTC B169B-00: Left Intelligent CONN Module (I-CON) LIN Communication Error: General Description: General Description
This DTC is set when communication error between DDM and other modules occurs.
Body CAN communication Control Units: BCM (Body Control Module), DDM (Drive Door Module), ADM (Assist Door Module), DPSM (Drive Power Seat Module), APSM (Assist Power Seat Module), FSJB (Front Smart Junction Box), RSJB (Rear Smart Junction Box), SCM (Steering Column Module), MFSW (Multi-Function Switch Module), SWRC (Steering Wheel Remote Controller Module), ARS (Rear Armrest Switch Module), ILM (Interior Lamp Module), PTM (Power Trunk Lid Module), HUD (Head Up Display), SMK (Smart Key Module)
DDM is linked with LHI-CON (Drive Integrated Connector) by Serial communication line. Therefore, It is possible to control Drive Outside Mirror of Folding/Unfolding by DDM.
*1 CAN (Controller Area Network): CAN is serial bus communication type which links not only communication system but also control units each other.
*2 LIN (Local Interconnect Network): LIN is serial communication type which is used in electrical control system. (This is less expensive.)
BCM: Body Control Module
SMK: Smart Key
DDM: Driver Door Module
ADM: Assistant Door Module
PSM: Power Seat Module
MFSW: Multi-Function Switch
SWRC: Steering Wheel Remote Controller
ARS: Rear Armrest Switch Module
SCM: Steering Column Module
SJB: Smart Junction Box
HUD: Head-Up Display
BSD: Blind Spot Detection
EMS: Engine Management System
TCU: Transmission Control Unit
EPB: Electronic Parking Brake
PSB: Pre-Safe Seat Belt
ESC: Electronic Stability Control
AFLS: Adapted Front-Lighting System
SBW: Shift-By-Wire System
CLUM: Cluster Module
DATC: Dual Automatic Temp. Control
ECS: electronic control suspension
SCC: Smart Cruise Control
EHPS: Electro Hydraulic Power Steering System
SAS: Steering Angle Sensor
TPMS: Tire Pressure Monitoring System
ACU: Airbag Control Module
LDWS: Lane Departure Warning System
CUBIS: Car Ubiquitous System
AAF: Active Air Flap
HU: Head Unit
RRC: Rear Remote Control
AMP: Amplifier
SVM: Surround View Monitoring
RSE: Rear Seat Entertainment System Monitor
CCP: Central Control Panel
MON: Monitor (Front Monitor)
PTM: Power Trunk Lid Module
ILM: Interior Lamp Module