Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Electronic Stability Program (Esp) System) >> ESP Control Module (HECU) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is the reverse of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Proceed to Brake system - "BRAKE SYSTEM BLEEDING ")

scientia non olet · About Mike's Workshop Manuals