Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Rio LX, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P1C2B: OPI Hall Sensor Error >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC.
  2. Operate the vehicle within DTC Enable conditions in General information.
  3. Are any DTCs recorded?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About Mike's Workshop Manuals