Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Engine Control System (HEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> ETC Motor

ETC Motor

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 3 and 6.
  4. Check that the resistance is within the specification.

Specification:  1.2 ~ 1.8Ω [20°C(68°F)]

scientia non olet · About Mike's Workshop Manuals