| DTC Strategy |
Case 1 |
- Monitoring accuracy of time measurement by engine-off timer micro-com during engine running
|
- Poor Connector Connection
- Defected PCM
|
| Case 2 |
- Monitoring engine-off timer start increment during engine stop
|
| Enable Condition |
Case 1 |
- Ignition Switch "ON"
- !0 sec. after Ignition Switch "ON"
- Battery voltage higher than 5V and lower than 16V
|
| Case 2 |
- Engine running state to Engine stop state transition
- Battery voltage higher than 5V and lower than 16V
|
| Threshold Value |
Case 1 |
- Deviation between external engine off timer and internal micro-com timer over 10 sec.
|
| Case 2 |
- Engine-off timer less than 1sec. Or more than 4 sec.
|
| Diagnostic Time |
Case 1 |
|
| Case 2 |
|
| MIL ON Condition |
|