Passenger/Rear Power Window Switch Inspection

1. Disconnect the negative (-) battery terminal.
2. Remove the front door trim panel.

   (Refer to FRONT DOOR .)

3. Disconnect the connector from the switch.
   Fig 1: Disconnecting Connector From Passenger/Rear Power Window Switch

   Courtesy of KIA MOTORS AMERICA, INC.
4. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Passenger/Rear Power Window Switch Continuity Reference Chart

Courtesy of KIA MOTORS AMERICA, INC.