Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 61 (Cluster Module Diagnosis (HEV)) >> DTC B1602: CAN Error >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After A Repair, It Is Essential To Verify That The Fault Has Been Corrected.

  1. Connect Scan Tool And Select "DTC Analysis" Mode.
  2. Clear The DTCs And Operate The Vehicle Within DTC Enable Conditions In General Information.
  3. Is Any DTC Displayed Again?

    Yes 

    • Go To The Applicable Troubleshooting Procedure.

    No 

    • System Performing To Specification At This Time.
scientia non olet · About Mike's Workshop Manuals