Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Engine Control System (HEV)) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> Bank 1/Intake

Bank 1/Intake

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor.
Fig 1: Locating Camshaft Position Sensor Connector And Mounting Bolt - (Bank 1/Intake)
G11815758Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals