Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Automatic Transaxle Control System (HEV)) >> Inhibitor Switch >> Repair Procedures >> Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Connect the Inhibitor switch connector (A).
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".

    Specification:  See below "SIGNAL CODE TABLE ".

scientia non olet · About Mike's Workshop Manuals